FKD Frame Protection
Printed on high quality paint protection vinyl, with scratch resistant printing for extra protection!
Fitting guide
THINGS YOU WILL NEED
STANLEY BLADE, HAIRDRYER, ISOPROPYL ALCOHOL
APPLICATION
- GET YOUR BIKE NICE AND CLEAN USING HOT SOAPY WATER TO GET RID OF THE DIRT AND GREASE
- USING THE ISOPROPYL CLEAN ANY AREAS OF THE BIKE WHERE THE KIT WILL GO
- OUR KITS ARE DESIGNED TO FIT LARGE FRAMES SO TRIMMING MAYBE REQUIRED FOR A DESIRED FIT, OFFER UP THE DECALS TO THE FRAME AND TRIM TO SUIT
- ONCE YOU ARE HAPPY WITH THE POSITION, PEEL FROM TOP (ON CHAIN STAYS PEEL FROM THE SIDE) AND MAKE A FOLD IN THE BACKING PAPER AT THE HALF WAY POINT
- PUT YOUR DECAL IN POSITION AND LIGHTLY TACK THE EXPOSED HALF, PUSH DOW FROM THE CENTRE PUSHING DOWN OUTWARDS TOWARDS THE EDGE. ENSURE NO AIR IS TRAPPED, REMOVE THE REST OF BACKING PAPER AND WORK YOUR WAY DOWN THE CENTRE AND AROUND THE EDGES
- IF YOU DO GET A BUBBLE SIMPLY PULL THE DECAL BACK AND PUSH OUT THE AIR, IF YOU'RE FEELING BRAVE YOU CAN POP BUBBLES WITH THE STANLEY BLADE
- USE THE HAIRDRYER TO HELP ON ANY CURVES OR CONTOURS, HEAT ALL EDGES AND PRESS FIRMLY TO BOND THE KITS TO THE FRAME.